Type ETR 10490/10491 pickled brass
Turned design of solid brass - with metering spindle for the exact drop dosing - easy visual inspection of drop fall – inspection glass of »PLEXIGLAS« or natural glass. These UNIdrip feed lubricators can be used universally, e.g. in building machinery, agricultural machines, conveying and transport equipment as well as in all sections of the general machine building industry. With the UNI drip feed lubricators MOS(electrically controlled) automatic central lubrication systems can be combined for any application. It is also possible to feed the lubricant to the drip feed lubricators through the circuit of a gear pump. For the simultaneous supply of several lubricating points, the UNI drip feed lubricators ETR can be connected in one supply line one behind the other. The metering spindles permit an dosing for each lubricating point to be supplied. The lubrication equipment structured in this way is centrally switched on and off through the connected oil dispenser.
Type | inlet G 1/8" | outlet G 1/8" | Art.-No. Acryl-glass | Art.-No. Nat. glass |
ETR 10490 | both-way | female screw | 11 090 41 12 | 11 090 42 12 |
ETR 10491 | one-side | male screw | 11 091 41 12 |
11 091 42 12 |
ETR 10492 | both-way | male screw | 11 092 41 12 |
11 092 42 12 |
ETR 10496 | one side | female screw | 11 093 41 12 |
11 093 42 12 |
Type MTR 1-10 pickled brass
UNI drip feed lubricators MTR are batteries composed of individual drip feed lubricators with lateral angle brackets. Metering spindles permit the exact drop dosing at each individual drip feed lubricator. The drop fall can easily be observed by the installed inspection glasses. In combination with the oil dispensers MOS(manual), EOS (electrically controlled) or supplied by a gear pump, universal central lubrication systems can be built. Combined with UNIoil dispensers and UNI lubricating brushes SPR(round) / SPF(flat), lubricating and maintenance units are obtained for the lubrication of chains, conveyors, slide ways and metal ropes, that have many times stood their test.
Type OG UG | A | B | C | D |
OTR G 1/8 / 1/4 | 62 | 36 | 14 | 12 |
OTR G 1/8 / 3/8 | 68 | 38 | 14 | 12 |
OTR G 1/8 / 1/4 | 62 | 32 | 14 | 8 |
OTR G 1/8 / 3/8 | 68 | 38 | 14 | 12 |
OTR G 1/8 / 1/4 | 62 | 32 | 14 | 8 |
OTR G 1/8 / 3/8 | 68 | 38 | 14 | 12 |
Type OG SA | A | B | C | D |
OTS G 1/8 / 7 Ø | 65 | 37 | 14 | 13 |
OTS G 1/4 / 7 Ø | 65 | 37 | 14 | 13 |
OTS G 1/8 / 7 Ø | 65 | 37 | 14 | 13 |